The Eyeline Back Vertex Distance (BVD) Gauge is an accurate low-cost device for measuring the distance between the back of a lens to the cornea in mm. The set comes with a pouch and calculator. The instructions for plus and minus powers are printed on the reverse side of the calculator. The gauge and calculator can be purchased separately i.e. one calculator and several gauges.
This measurement is very important when deciding on the lens power especially in swimming/ski goggles when the lenses are in the frame will more than 10/12 mm from the cornea, or when the lens powers are greater than ±6D
The advantage of this gauge is once the measurement is made, the distance set on the scale does not move when the measurement is completed. It also compensates for 1 mm to account for the eyelid thickness.
Easy to use. Simply read the measurements and sanitize.
Tell the patient what you are about to do so they don’t get a fright when the eyelid is touched.
Place the frame on the patient after the fitting of it has been completed while the demo lenses are still in place. Ask the patient to close the eye and to look straight ahead so the cornea bulge is in line with the lens centre. Close the scissor action so it reads zero on the scale and place the arms behind the lens and slowly open them until the tips are lightly touching the back of the lens and the cornea. Remove and read off the measurement.
Gauge Height: 110 mm
Calculator: 150 mm Dia.
EYOBVDCC - BVD Gauge circular calculator with pouch
EYOBVDG - BVD Calliper without pouch
EYOBVDGP - BVD Calliper with pouch
EYOBVDGS - BVD gauge set including pouch, callipers and circular calculatorENQUIRE NOW